Simplex 4100U Installation Manual download pdf (Page 20)

Page 6 SIMPLEX 4100 FIRE INDICATOR PANEL

OPERATOR MANUAL

Document No.: 4100-M001 May 1997 Issue 1.0

3 ALARM CONDITIONS

When an alarm condition is detected, it is indicated at the main 4100 FIP by the

following:

- Red "ALARM" LED is flashing.

- Tone-alert is pulsing.

- LEDs on the local annunciator may illuminate.

- Alphanumeric display will show an alarm condition.

***ALARM*** Press ACK to review.

ALARMS = 1 ISOLATED = 0 FAULT = 0

The display has one red LED which is used to indicate an alarm condition. When an

alarm occurs, the red LED flashes, the tone-alert pulses, and an alarm message is

displayed on the alphanumeric display. The red LED will glow steady and the

tone-alert is silenced upon activation of the <ALARM ACK> key. When the alarm

condition clears, the red LED will turn off and the alarm will be removed from the

alarm list. Once alarm conditions have been cleared, Alarm events can be reviewed

by examining the historical alarm log.

3.1 HOW TO OPERATE THE PANEL DURING AN ALARM CONDITION

(Red Alarm Light Flashing And Tone Alert Pulsing)

Figure 2

Operator Interface Panel Showing Alarm Condition

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 67 68

No comments

Simplex 4100U Installation Manual Page 20