Simplex 4100U Installation Manual Page 57

  • Download
  • Add to my manuals
  • Print
  • Page
    / 72
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 56
- 57 -
57 of 72
SIMPLEX Fault Assistance Guide RevA
29 April 2009
5.4.3 Links and DIP Switches
Each STBM9008 module contains a DIP switch that must be set to the correct address to
define the function of the module. Switches SW5-8 set the function of the module and must be
set as indicated (a more detailed description of settings included in Table 4). Switches SW1-4
determine the address, 0 - 15, of the module and thus the output line numbers (as seen in
Table 3). The mapping of the evacuation zones to the strobe output line numbers is controlled
by the software in the ECP module.
The Link settings for each output are shown in the table, below.
Table 2: Link Settings and their corresponding Outputs
Table 3: DIP Switches 1 – 4 – Select Card Address
Page view 56
1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 71 72

Comments to this Manuals

No comments