Simplex 4100ES-S1 Installation Guide download pdf (Page 14)

Mounting DACT

4100-6052

•

The 4100-6052 DACT can only be installed in the CPU bay.

•

The DACT must be the leftmost assembly in the CPU bay.

•

See Figure 9.

1. Disconnect AC power at the source. Disconnect the + (red) wire from the battery.

2. Install harness 733-929 as shown. Connect from P1 on the DACT to the two 4-position

connectors on the CPU motherboard. The blue wire to the top connector (P8) and the white

wire to the bottom connector (P7).

3. Secure the DACT bracket to the leftmost slot on the chassis using four #6 standoffs (screwed to

the chassis) and four #6 screws.

Figure 9. Mounting the 4100-6052 DACT module

3:5&200+$51(66



 '$&7

02'8/(

0$67(5&21752//(5

%2$5'

&38027+(5%2$5'



%$<72%$<

+$51(66 3:5

&2006

Mounting

(Continued)

1 2 ... 9 10 11 12 13 14 15 16 17 18

No comments

Simplex 4100ES-S1 Installation Guide Page 14