Simplex 4100ES-S1 Operator's Manual download pdf (Page 49)

7-3

The 4100ES-S1 uses four access levels, referred to by the numbers 1 through 4, to control what

operators can do with the system. The system typically operates at access level 1, which allows

an operator to accomplish basic tasks without logging in to the system.

Other functions, for example certain control functions, may be passcode protected to prevent

access by unauthorized personnel.

Follow these steps to log in to the system at access level 2, 3, or 4.

1. Obtain the passcode for the access level at which you want to operate.

2. Press the <MENU> key. The alphanumeric display shows the following message.

3. Press the <ENTER> key on the numeric keypad. The following message displays.

4. Press the 1 key on the numeric keypad. The display shows the following message.

5. Enter the passcode for the access level. The passcode can be up to 10 digits in length.

Press the <ENTER> key on the numeric keypad when you have finished entering the code.

An X is displayed for each digit of your passcode, as shown below.

Continued on next page

Logging In and Out of the System

Introduction

Press <NEXT> or <PREVIOUS> to scroll

Change Access Level?

1 = Login 2 = Logout

CURRENT ACCESS LEVEL = 1

Enter a Passcode followed by <ENTER>

XXX

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 85 86

No comments

Simplex 4100ES-S1 Operator's Manual Page 49