Simplex 4100U User Manual download pdf (Page 3)

Metasys Integrator Simplex Application Application Note 3

Introduction

This document explains Metasys Integrator Simplex

4100/4100U/4120/4020 Computer Port applications. Use this document

with the Metasys Integrator unit technical bulletins, which provide

information on installing and commissioning the Metasys Integrator unit.

For information on Simplex equipment, see Simplex documentation

(obtainable from a Simplex representative).

Note: If you use a Universal Packaging Module (UPM) enclosure, you

must install the Metasys Integrator unit 300 Series in a two high

enclosure (EN-EWC25-0) rather than a one high enclosure

(EN-EWC13-0) as shown in the figures in this application note.

The Metasys Integrator unit is not Underwriters Laboratories Inc. (UL)

Listed as a fire alarm control unit (UOJZ). However, the

Metasys Integrator unit is UL Listed as a smoke control accessory unit

(UUKL) for smoke control applications. The Metasys Integrator unit is

designed to provide secondary monitoring for a fire alarm, while the

Simplex fire alarm control panels provide notification and control

functions.

IMPORTANT: Do not use the Metasys Integrator unit as a primary

fire alarm control unit. The Metasys Integrator unit

provides secondary monitoring and can be used for

smoke control applications. A fire alarm control panel

is necessary to provide notification and alarm control

functions. Use of the Metasys Integrator unit alone

may result in a failure to obtain proper response to a

fire with a resulting greater risk of property damage,

personal injuries, or deaths.

The Metasys Integrator unit can connect to either a network of

Simplex panels via a Simplex Network Display Unit (NDU), or to an

individual panel. They cannot be combined on the same

Metasys Integrator panel.

Application

Details

Each Metasys Integrator vendor port can connect to one 4100/4100U/4120

or 4020 Computer Port.

Both the 4100U and NDU can support more data than one NCM can

support. To ensure resonable performance, do not define more than

2,500 objects per NCM. Companion systems do not support more than

800 points.

1 2 3 4 5 6 7 8 ... 26 27

No comments

Simplex 4100U User Manual Page 3